RSPICE / GENERATED REFERENCE
Search the source-defined analysis, model, CLI, and interface catalog.
Generated from commit 908a81b40fd8. The checked-in snapshot is regenerated during site builds and compared in CI.
- SOURCE REVISION
- 908a81b40fd8
- COMMIT DATE
- 2026-11-06
- WORKSPACE VERSION
- 0.1.0
- RUST VERSION
- 1.94
CATALOG SEARCH
Filter 275 generated entries.
275 entries shown
01 / ANALYSES
Analysis families
| Analysis | Invoked by | Notes |
|---|---|---|
| Operating point | .OP | A deck with no analysis card runs one implicitly |
| DC sweep | .DC | One source, or nested two-source |
| Temperature sweep | .TEMP | A run axis over a list of temperatures |
| Parametric sweep | .STEP | A run axis over a parameter, a device or a DATA= table |
| Transient | .TRAN | Adaptive timestep, breakpoint handling, TRNOISE transient noise, --checkpoint/--resume segmentation |
| AC small-signal | .AC | Including .AC DATA= |
| Noise | .NOISE | Including .NOISE DATA= |
| Pole-zero | .PZ, --pz-input/--pz-output | |
| Transfer function | .TF | |
| Sensitivity | .SENS, --sens-output/--sens-param | DC and AC |
| Distortion | .DISTO | Third-order Volterra; harmonic and two-tone intermodulation |
| DC mismatch | .DCMATCH | |
| Fourier / THD | .FOUR | Post-processes a transient |
| Transient spectrum | .FFT | Typed spectra, Xyce-compatible windows, calibrated DC-through-Nyquist bins |
| Monte Carlo | .MC, --monte-carlo | Operating-point voltages or named .MEAS results per trial; gaussian, uniform or worst-case |
| Process corners | --corners | Reruns the deck's analyses once per corner from --corner-lib |
| S-parameters | .SP, --sparam | Touchstone export |
| Stability (loop gain) | .STB | Probes a 0 V source placed in the loop |
| Harmonic balance | .HB, --hb-freq | |
| Envelope | .ENVELOPE | Envelope continuation over a preceding .HB |
| Periodic steady state | .PSS, --pss-freq | Shooting method; driven or autonomous |
| Periodic AC, transfer function and noise | .PAC, .PXF, .PNOISE | Linearized around the preceding .PSS or .HB; phase noise by Floquet projection, PPV for oscillators |
| Periodic stability | .PSTB | Floquet multipliers of a shooting .PSS |
| Quasi-periodic | .QPSS, .QPAC, .QPXF, .QPNOISE | Multi-tone steady state and its small-signal analyses |
| Periodic S-parameters, HB S-parameters, HB noise | Configured studies | rspice study and the application |
| Safe operating area, optimization | Configured studies | rspice study and the application |
| Measurements | .MEAS | Over TRAN, DC, AC and NOISE; GOAL/TOL gates the exit status |
02 / DEVICES
Device and compact-model families
| FAMILY | MODELS |
|---|---|
| MOSFET | Native: Berkeley MOS1/MOS2/MOS3/MOS6 and ngspice MOS9, legacy BSIM1/BSIM2 (LEVEL=4/5), BSIM3 3.3.0 (LEVEL=8/49), BSIM4 v4.8 (LEVEL=14/54), BSIM-SOI in FD/DD/PD variants (LEVEL=10/55/56/57), VDMOS (LEVEL=18), EKV 2.6 (LEVEL=260) and EKV3 (LEVEL=301). Generated: BSIM-BULK, BSIM-CMG, BSIM-IMG, PSP104, HiSIM-HV, HiSIM-SOI, HiSIM-SOTB, L-UTSOI, MVSG-CMC and others, by model type or by their LEVEL |
| Bipolar | Native Gummel-Poon (LEVEL=0/1/2) and VBIC (LEVEL=4/9/11/12/13); generated HICUM/L0, HICUM/L2, MEXTRAM 505 and VBIC 1.3 |
| Junction | Diode (LEVEL=0/1/2/3), generated DIODE_CMC and JUNCAP200, JFET level 1, Parker-Skellern JFET2 (NJF/PJF LEVEL=2), MES/MESA/HFET-family Z devices, GaN HEMT |
| Passives | R / C / L with temperature coefficients, generated R2_CMC and R3_CMC resistors, coupled inductors and multi-winding transformers, saturable inductor with Jiles–Atherton hysteresis |
| Transmission lines | Ideal, lossy (LTRA, TXL), coupled multi-conductor (CPL) |
| Sources | Independent V/I with PULSE, SIN, EXP, PWL, PAT, SFFM, AM, and TRNOISE white + 1/f waveforms; E/F/G/H controlled sources; B behavioral sources; PWL-from-file sources |
| Switches & macromodels | Voltage- and current-controlled switches, op-amp macromodel |
| Mixed-signal | Verilog-AMS digital and real-number (wreal) modules and SystemVerilog real nettypes, with automatic connect-module insertion; XSPICE-style analog and digital code models, tri-state drivers, A/D–D/A bridges |
| Verilog-A | Generated compact models and externally compiled modules; see below |
03 / CLI COMMANDS
Top-level commands
| COMMAND | DESCRIPTION |
|---|---|
rspice run | Execute the analyses a netlist requests |
rspice study | Check, plan and run a versioned study over named analysis tasks |
rspice check | Validate syntax and connectivity |
rspice info | Print parsed netlist information |
rspice models | List the shipped SPICE model packs and look up parts in them |
rspice compare | Compare output against a golden result |
rspice convert | Convert between raw, ASCII raw, CSV, TSV, JSON, HDF5 and VCD |
rspice health | Probe process liveness or parser-to-solver readiness |
rspice capabilities | Describe the execution routes and result representations this build supports |
rspice compile-va | Compile a Verilog-A model |
rspice completions | Generate shell completion scripts |
04 / CLI OPTIONS
Command options, configuration, and exit codes
rspice-cli / Commands11 entries
| Command | Purpose |
|---|---|
| run | Execute the analyses a netlist requests, or one requested on the command line |
| study | check, plan or run a typed JSON study with explicit task dependencies |
| check | Validate syntax, analysis requests, output symbols, topology and device construction without simulating |
| info | Summarize a netlist without simulating it |
| models | List the shipped SPICE model packs and look up parts in them |
| compare | Compare a result against a golden reference |
| convert | Convert a result between file formats |
| compile-va | Compile a Verilog-A model and report its interface |
| health | Probe liveness or numerical readiness |
| capabilities | Report this build's execution routes, control-script coverage, result mappings and unsupported workflows |
| completions | Print a shell completion script for bash, zsh, fish, powershell or elvish |
rspice-cli / Commands / Global options6 entries
| Option | Effect |
|---|---|
| -v, --verbose | More console detail, and debug logging unless --log-level is set |
| -q, --quiet | Suppress all non-error output |
| --config FILE | Use this configuration file instead of the user and project files |
| --log-level LEVEL | off, error, warn, info, debug or trace; overrides --verbose and RUST_LOG |
| --log-format FORMAT | text (default) or json log records on stderr |
| --error-format FORMAT | text (default) or json diagnostics on stderr; json also selects JSON logs |
rspice-cli / Commands / Netlist options4 entries
| Option | Effect |
|---|---|
| -I, --include DIR | Extra search directory for .include and .lib (repeatable) |
| -D, --define NAME=VALUE | Override or define a root-scope parameter (repeatable) |
| --spice-dialect DIALECT | Compatibility dialect, applied to parsing and simulation alike |
| --redefined-params MODE | What a .PARAM defined twice in one scope means |
rspice-cli / Commands / Netlist options3 entries
| Dialect | Semantics |
|---|---|
| best | RSpice's most accurate available device evaluator, with ngspice expression syntax |
| ngspice | ngspice-compatible expression and device semantics |
| xyce | Xyce-compatible expression, measurement and device semantics |
rspice-cli / Running a deck / Analysis cards20 entries
| Card | Executes |
|---|---|
| .OP | DC operating point |
| .DC | DC sweep, with an optional second source |
| .TRAN, .TR | Transient, including transient noise |
| .AC, .NOISE | Small-signal AC and noise over a generated sweep, or over the frequencies of a .DATA table with DATA=<table> |
| .DISTO | Harmonic or two-tone distortion |
| .TF, .PZ, .SENS | Transfer function, pole-zero, and DC or AC sensitivity |
| .SP | S-parameters over ports declared by portnum= source annotations or named on the card; DONOISE adds port noise |
| .STB | Loop stability |
| .DCMATCH | DC mismatch |
| .PSS, .HB | Periodic carriers: shooting steady state and harmonic balance |
| .PAC, .PXF, .PNOISE | Periodic AC, transfer function and noise around the nearest preceding .PSS or .HB; FROM= pins the family |
| .PSTB | Periodic stability around the nearest preceding .PSS |
| .ENVELOPE | Envelope following from the nearest preceding .HB |
| .QPSS | Quasi-periodic steady state |
| .QPAC, .QPXF, .QPNOISE | Quasi-periodic AC, transfer function and noise around the nearest preceding .QPSS |
| .MC | Monte Carlo |
| .FOUR, .FOURIER | Fourier analysis of the transient authored before the card, or of the first transient when none precedes it |
| .FFT | FFT of the deck's first transient |
| .STEP, .TEMP | Run axes: the other cards run at every coordinate |
| .LIN SPARCALC=0 | Accepted; the deck's ordinary .AC runs. Every other .LIN form is refused |
rspice-cli / Running a deck / Analyses requested on the command line6 entries
| Flag | Runs | Related flags |
|---|---|---|
| --monte-carlo N | N Monte Carlo trials | --mc-distribution, --mc-spread, --mc-param, --seed |
| --pss-freq F | Periodic steady state at fundamental F; refused beside an authored .PSS | --pss-harmonics N (default 9), --pss-tstab TIME |
| --hb-freq F | Harmonic balance at fundamental F | --hb-harmonics N (default 9) |
| --pz-input NODE --pz-output NODE | Pole-zero between two nodes | --pz-transfer voltage (default) or current |
| --sens-output NODE --sens-param NAME | DC sensitivity of V(NODE) to one .PARAM | --sens-value VALUE, the nominal value (default: the deck's) |
| --sparam "P1+,P1-,P2+,P2-" | Two-port S-parameters over the deck's first .AC sweep; 0 names ground | --sparam-z0 OHMS (default 50) |
rspice-cli / Running a deck / HDL designs4 entries
| Option | Effect |
|---|---|
| +PLUSARG … | Plusargs after the netlist (rspice run tb.cir +VERBOSE +N=4) for $test$plusargs and $value$plusargs; they precede the deck's .options hdl_plusargs, and the first match wins |
| --hdl-run-dir DIR | Directory that relative HDL file paths resolve against (default: the deck's directory) |
| --hdl-unrestricted-io | Let HDL file writes leave the run directory |
| --hdl-delay-select WHICH | Which value of each HDL min:typ:max expression the design elaborates with: typ (default), min or max; it takes precedence over the deck's .options hdl_delay_select |
rspice-cli / Running a deck / run flag reference12 entries
| Flag | Effect |
|---|---|
| -o, --output FILE | Result file; see Output files below |
| -f, --format FORMAT | raw, ascii, csv, tsv, json, hdf5 or vcd (default: output.format, else raw) |
| --save SIGNAL | Export only these signals, replacing the deck's .SAVE, .PROBE, .PRINT and .PLOT selection (repeatable; V(out), V(a,b), I(v1), @m1[id], all) |
| --expand-buses | With -f vcd, write each digital-bus member as its own one-bit $var |
| --compress, --compress-tol TOL | Decimate the published transient waveform within TOL (default 1e-4) |
| --meas | Print .MEAS results |
| --meas-file FILE, --meas-format FORMAT | Write .MEAS results as json (default) or csv |
| --report-file FILE, --report-format FORMAT | Write a junit or tap CI report; each flag requires the other |
| --summary FILE | Write a JSON run summary, or print it to stdout with - |
| --allow-failed-meas | Exit 0 when only measurements fail |
| --allow-nonfinite | Export results containing NaN or Inf instead of failing |
| --progress | Show a progress bar during transient analysis |
rspice-cli / Running a deck / run flag reference3 entries
| Flag | Effect |
|---|---|
| --timeout SECONDS | Abort after this long (exit 124); transient and DC sweeps stop at the next safe point |
| -j, --jobs N | Workers for .ALTER/.DATA variants and corners (default 1; 0 for every core) |
| --temp CELSIUS | Simulation temperature; refused beside a .TEMP or .STEP TEMP axis |
rspice-cli / Running a deck / run flag reference12 entries
| Flag | Effect |
|---|---|
| --maxiter N | Newton-Raphson iteration limit |
| --reltol TOL | Relative tolerance |
| --abstol TOL | Absolute tolerance for both node voltages and branch currents |
| --voltage-abstol TOL, --current-abstol TOL | Voltage (VNTOL) or current absolute tolerance alone; each takes precedence over --abstol |
| --charge-abstol TOL | Charge tolerance (CHGTOL) |
| --event-flux-abstol TOL | Flux-linkage conservation tolerance at physical transient events, in weber-turns (EVENTFLUXTOL, default 1e-24) |
| --residual-reltol TOL | Relative residual tolerance for equation convergence checks |
| --gmin G | Initial GMIN for convergence aids |
| --trtol TOL | Transient truncation-error tolerance (TRTOL) |
| --min-step TIME, --max-step TIME | Transient timestep bounds |
| --integration-method METHOD | trap, gear, euler or trapgear (the default, which switches automatically) |
| --convergence MODE | DC convergence preset: fast, default or robust |
rspice-cli / Running a deck / run flag reference3 entries
| Flag | Effect |
|---|---|
| --tran-stop TIME | Override the .TRAN stop time without editing the deck |
| --checkpoint FILE | Save the transient integrator state when the run completes |
| --resume FILE | Continue a transient from a checkpoint; the deck must be byte-identical to the one that wrote it |
rspice-cli / Output files / csv, tsv, raw, ascii: the flat authored projection21 entries
| Mode | Contents |
|---|---|
| .OP | signal,value rows |
| .DC, .TRAN, .AC, .NOISE | Node and branch columns over the family's own scale; .TRAN adds a D(node) column per digital event net and an E(node) column per real event net, each holding its value until the next event |
| Aggregated axis sweep | One row per coordinate, node voltages as columns |
| .FOUR | One row per harmonic: frequency, magnitude, phase, DC component, THD |
| .MC, --monte-carlo | Per-trial samples over trial_index, statistics, histograms, confidence states and campaign context |
| .PSS, --pss-freq | One period of the steady-state waveforms |
| .HB, --hb-freq | Complex spectrum per node over the harmonic frequencies |
| .PAC | Complex node and branch columns per retained sideband (V(out):sb0), scaled by PACMAG, over the offset frequency, then the fundamental and each sideband's frequency in Hz; INCLUDEDC=NO omits sideband zero |
| .PXF | Complex transfer columns <signal>:sb<in>->sb<out> over the offset frequency |
| .PNOISE | Real densities over the offset frequency: output_noise (V²/Hz) and each source's contribution:<label> around a driven carrier, phase_noise (dBc/Hz) around an autonomous one |
| .PSTB | One row per Floquet mode: multiplier magnitude and phase, stability margin, damping, frequency and probe participation |
| .ENVELOPE | The continued slow-time trajectory, shaped like a transient table |
| .QPSS, .QPAC, .QPXF, .QPNOISE | The primary result series; selecting an unavailable sample fails, and JSON keeps the full evidence |
| .STB | Complex loopgain, loopgain_mag_db, loopgain_phase_deg and the stb: evidence columns |
| .TF | Gain, input impedance, output impedance |
| .PZ, --pz-input | pole(i)/zero(i) complex columns, dc_gain, high_frequency_gain and the pz: evidence columns |
| .SENS, --sens-output | dV/d(param) columns: one point for DC, a series over frequency for AC |
| .DCMATCH | Output statistics and per-contributor sigma_parameter(…), sensitivity(…), contribution(…) and share(…) columns, each named <scope>:<instance>/<parameter> |
| .DISTO | peak(<product>:<signal>) phasors and each product's frequency(<product>) |
| .SP | S_i_j complex columns and Z0(port) reference impedances in ohms; Touchstone instead when -o ends in .sNp, .snp or .ts |
| --sparam | S11, S21, S12, S22 and Z0(1), Z0(2); Touchstone instead when -o ends in .s2p, .snp or .ts |
rspice-cli / Output files / Reserved columns6 entries
| Column | Meaning |
|---|---|
| <name>:unavailable(<reason>) | 1 beside a missing scalar whose absence is proven: positive_infinity, negative_infinity, no_crossover or empty_domain |
| <name>:sensitivity_status | Per sample: 0 available, 1 zero output, 2 nondifferentiable magnitude, 3 outside the representable range |
| <name>:monte_carlo_status | A missing statistic: 1 empty population, 2 insufficient samples, 3 unrepresentable result |
| mc:identity:… | Exact text, integer and unit identities of a Monte Carlo report, text hex-encoded as UTF-8 |
| stb:pole(N), stb:completed(…), stb:circuit_stability(…), stb:circuit_poles(…) | STB natural poles in rad/s, and the completion, stability and pole-spectrum verdicts |
| pz:… | Qualification of a pole-zero root set |
rspice-cli / Structured studies (study)3 entries
| Command | Effect |
|---|---|
| rspice study check STUDY | Validate the study, its captured circuit sources, typed settings and dependency graph without solving |
| rspice study plan STUDY | Also report the prepared task order, stable instance IDs, configuration digests, and source and snapshot digests |
| rspice study run STUDY -o RESULTS | Execute the graph and publish one rspice.study.results document |
rspice-cli / Checking a deck (check)5 entries
| Option | Effect |
|---|---|
| --connectivity | Also warn about nodes with one device terminal (TOPOLOGY_ONE_DEVICE_TERMINAL) or no DC path to ground (TOPOLOGY_NO_DC_PATH) |
| --models | Also warn about undefined model references |
| --strict | Fail on any warning (exit 2) |
| --converters | Also list the converters the build inserts on mixed-signal boundaries, one row each: the net, the port that meets it, its direction, the module and instance, the supply, and the parameters the connect statement set. With --json, the document's converters array holds each record with every parameter's value and source (an infinite value is null) |
| --json | Print one rspice.check document: valid follows the non-strict verdict, and strict_valid is false whenever there are warnings |
rspice-cli / Inspecting a netlist (info)5 entries
| Option | Adds |
|---|---|
| -d, --detailed | Each element's nodes and typed device or source specification |
| --models | Each model's type and parameters |
| --hierarchy | Root instances with their connections and overrides, and each subcircuit definition with its ports, defaults, local parameters and instance references, by scope |
| --params | Effective root parameter bindings, including strings, complex values and analysis-dependent expressions |
| --json | Print one rspice.info document |
rspice-cli / Comparing results (compare)6 entries
| Option | Effect |
|---|---|
| --variables VAR | Compare only these signals (repeatable; see convert) |
| --interpolate | Resample the result onto the golden's scale: analog signals linearly, digital and real event signals by holding their last value. The result must cover the golden range, within four ULPs at the endpoints; nothing is extrapolated |
| --fail-fast | Stop at the first difference |
| --json | Print one rspice.comparison document |
| --section NAME_OR_INDEX | Select one result from a RAW, HDF5 or Touchstone container (see convert) |
| --bless | Accept the result as the new golden |
rspice-cli / Converting results (convert)4 entries
| Option | Effect |
|---|---|
| --variables VAR | Keep only these signals (repeatable). Names match without regard to case; a qualified name such as V(out) or D(clk) selects exactly that signal, and a bare name must be unambiguous |
| --start VALUE, --stop VALUE | Clip the scale; --start must not exceed --stop |
| --section NAME_OR_INDEX | Select one result from a RAW, HDF5 or Touchstone input that holds several: an exact plot or group name, or a one-based index from the list the diagnostic prints. Required when there are several; refused for a single-document input |
| --expand-buses | With --to vcd, write each bus member as its own one-bit $var |
rspice-cli / Verilog-A models (compile-va)6 entries
| Option | Effect |
|---|---|
| -o, --output FILE | Write a versioned rspice.compile_va JSON summary: source, model, terminals, internal nodes, parameters, and compiler warnings. Each public parameter gives its type, its constant default (a string for a string parameter) or, for a default computed from other parameters, default: null with the source text in default_expression, and its min/max bounds with min_exclusive/max_exclusive, min_expression/max_expression and exclude |
| -I, --include DIR | Extra include directory (repeatable) |
| --module NAME | Select one module of a multi-module source |
| --detailed | Also print per-branch stamp and Jacobian entry counts |
| --show-usage | Print an example netlist instantiation, with the absolute source path and module selection |
| --strict | Refused with capability veriloga.strict_lrm (exit 69): strict LRM checking is not implemented |
rspice-cli / Model packs (models)4 entries
| Option | Effect |
|---|---|
| --part NAME | Every pack that defines this exact part name, ignoring case |
| --device CLASS | Every definition of a canonical device class, such as diode or jfet-n |
| --search TEXT | Definitions whose name contains the text, ignoring case |
| --shippable-only | Only redistributable packs and unrestricted definitions, applied before results are limited |
rspice-cli / Observability10 entries
| Schema | Written by |
|---|---|
| rspice.check | check --json |
| rspice.info | info --json |
| rspice.comparison | compare --json |
| rspice.compile_va | compile-va -o |
| rspice.capabilities | capabilities --json |
| rspice.measurements | run --meas-file in JSON |
| rspice.diagnostic | Nonfatal stderr diagnostics under --error-format json |
| rspice.study.check, rspice.study.plan, rspice.study.run | study check, plan and run with --json |
| rspice.study.progress | study run --progress-json, on stderr |
| rspice.study.results | study run -o |
rspice-cli / Configuration file6 entries
| Variable | Effect |
|---|---|
| RSPICE_TEMPERATURE | Default simulation temperature (Celsius) |
| RSPICE_OUTPUT_FORMAT | Default output format |
| RSPICE_INCLUDE_PATH | Include search paths, platform path separator (; on Windows, : elsewhere) |
| RSPICE_LIBRARY_PATH | Model library paths, platform path separator |
| RSPICE_MODELS_DIR | Model tree rspice models reads |
| RSPICE_MAX_<RESOURCE> | Override any [resources] key in uppercase, for example RSPICE_MAX_BATCH_RUNS or RSPICE_MAX_NETLIST_BYTES |
rspice-cli / Exit Codes21 entries
| Code | Category | Meaning |
|---|---|---|
| 0 | — | Success: simulation ran and every check passed |
| 1 | compilation, conversion | A failure with no engine category: Verilog-A compile failure, result-format conversion failure |
| 2 | usage | Usage error (invalid arguments, or warnings under check --strict) |
| 3 | verification | A .MEAS failed or did not evaluate, or compare found mismatches |
| 65 | netlist | Invalid authored input: netlist parse failure, singular topology from check |
| 66 | input_not_found | Input file not found |
| 69 | capability | The deck is well formed and this build does not execute it: an unsupported analysis/device combination, model family, or netlist construct |
| 70 | internal | Internal error |
| 73 | output_commit | The run produced correct results and publishing them failed; the previous artifact is intact unless the message says otherwise |
| 74 | io | I/O error outside a publication transaction (input read or console output failure) |
| 75 | resource_limit | A configured resource budget was exceeded; the same workload succeeds under a larger budget |
| 76 | persistence | A checkpoint or other persisted artifact was written by an incompatible format version |
| 78 | configuration | Configuration error |
| 80 | simulation | Circuit construction or device evaluation failed |
| 81 | solver | The numerical solver failed |
| 82 | convergence | An iterative analysis exhausted its convergence strategy |
| 83 | signal_unavailable | A valid authored output symbol is absent from the produced result |
| 84 | result_schema | A produced result violates its own published schema |
| 85 | materialization | A materialized .STEP/.TEMP run disagrees with the plan that produced it |
| 124 | timeout | Run exceeded --timeout |
| 130 | cancellation | Interrupted (Ctrl-C) |
05 / WORKSPACE
Rust packages and interfaces
| CRATE | PURPOSE |
|---|---|
rspice-core | The simulation engine: circuits, analyses, XSPICE and the compiled Verilog-A device, with every family module at its old path |
rspice-core-base | The engine's shared vocabulary: configuration, numerics, the sparse solver, the expression VM, waveform I/O and diagnostics |
rspice-core-netlist | The netlist parser, model libraries and the control protocol |
rspice-core-devices | The built-in device models |
rspice-matrix | Sparse matrix storage and LU factorization |
rspice-veriloga | Verilog-AMS compiler: bytecode VM, native and browser JITs, and the generator for the built-in models |
rspice-veriloga-runtime | Runtime ABI the generated models link against |
rspice-veriloga-models | The generated Verilog-A model catalog, one feature per model |
rspice-units | Measurement units shared by the engine and the result store |
rspice-output | Transactional publication of result files and checkpoints |
rspice-cli | The rspice command-line simulator |
rspice-app | The desktop and browser application |
rspice-vocabulary | Portable value types every application crate shares |
rspice-app-state | The application's persisted model: schematic, workspace, simulation plans, design checks and preferences |
rspice-app-services | The application's platform services: project lifecycle, persistence, recovery and file I/O |
rspice-app-runs | The application's run tier: preparing, dispatching, watching and publishing simulation runs |
rspice-app-workbench | The application's workbench framework: commands, feature registration, routing, the workbench session and its chrome, docks and tools |
rspice-app-sheets | The application's sheets feature: drawing sheets, title blocks, sheet sizes and the sheets of one drawing |
rspice-app-settings | The application's settings feature: Preferences, the preferences file, keyboard shortcuts and their portable artifacts |
rspice-app-results | The application's results feature: the Results workspace, its result documents and viewers, result import and waveform export |
rspice-app-hardcopy | The application's hardcopy feature: Page Setup, Print and Export, report authoring, hardcopy sources and the publication snapshot |
rspice-app-cloud | The application's cloud feature: the RSpice Cloud account and licence, web publication and the live session |
rspice-app-models | The application's models feature: the Models & PDKs workspace, the device-model editor, measurement correlation and PDK authoring |
rspice-design | Schematic documents, connectivity, hierarchy, rule checks and symbols |
rspice-design-model | Design-management data and the signed drawing-sheet package |
rspice-schematic-editor | Schematic and symbol editor painting and interaction |
rspice-ui-kit | Design tokens, widgets and the plot engine |
rspice-fonts | The embedded faces and the one fallback chain screen and print letter through |
rspice-project | The project file, its workspace and the save lifecycle |
rspice-project-contract | Project identity, technology binding and library catalog records |
rspice-simulation | Source preparation, scheduling and engine adapters for the application |
rspice-simulation-contract | Simulation requests and the application's analysis vocabulary |
rspice-worker | The browser module worker that runs simulations off the UI thread |
rspice-results | Exact result data, calculations and report documents |
rspice-results-ui | The result viewers |
rspice-formats | Result file codecs and project result persistence |
rspice-model-library | Model and PDK libraries, bindings and publisher trust |
rspice-hardcopy | Print and export rendering of schematics, plots and reports |
rspice-hardcopy-contract | Page setup, print plans and the receipts a project retains |
rspice-automation-protocol | The governed Python automation worker protocol |
rspice-automation-runtime | Verified managed Python runtime and worker transport |
rspice-engine-adapter | Engine executor for the cloud worker protocol |
rspice-pack | Signed, immutable model pack format |
rspice-cloud-domain, rspice-cloud-contract, rspice-cloud-client | The RSpice Cloud client, vendored from its own repository |
rspice-publication-contract | Versioned schema for sealed circuit publications |
rspice-publish | Renderer from publication snapshots to page bundles |
rspice-viewer | Figure runtime for published pages |